Prominent manufacturer of Seamless and Welded Hydraulic Tubing SAE J-524 and SAE J-525

 

Nakoda Steel Industry is one of the prominent and most respected manufacturers at the international level. Nakoda Steel Industry is manufacturer of Seamless and Welded Hydraulic Tubing SAE J-524 and SAE J-525 covers cold drawn and annealed seamless low carbon steel pressure tubing intended for use as hydraulic lines and in other applications requiring tubing of a quality suitable for flaring and bending.

Hydraulic Tubes

Nakoda Steel Industry is manufacturer of Seamless and WekdedHydraulic Tubing SAE J-524 and SAE J-525 covers cold drawn and annealed seamless low carbon steel pressure tubing intended for use as hydraulic lines and in other applications requiring tubing of a quality suitable for flaring and bending.
DOM tubing is created from flat sheets of raw material, rolled on a weld mill to produce mother hollow. A number of material options are available, including AISI class 1008, 1010, 1020, and 1026. The material is subjected to a normalizing heat treatment to produce suitable tube for cold working

STOCKED SIZE RANGE:
• 0.250” to 2.000” O.D. from 0.028” to 0.120” Wall Thickness

We will Supply tubes from Malaysia, India & China.

CHEMICAL COMPOSITION (J525 HYDRAULIC TUBING)

Chemistry	%
Carbon	0.06 – 0.18 Max
Manganese	0.30 – 0.60
Phosphorus	.040 Max
Sulfur	0.050 Max

MECHANICAL PROPERTIES (TYPICAL)

Yield (PSI)	Tensile (PSI)	Hardness (Max HRB)	Elongation (in 2″ Min)
25,000	45,000	65	35%